PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 407R1
407R1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include special_features: 1-7/8"DIA, 3/4"SCREW LENGTH, part_name_assigned_by_controlling_agency: ZINC, RUBBER/TRIM TAB. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
407R1
NSN: 3110-00-686-1116
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
special_features1-7/8"DIA, 3/4"SCREW LENGTH
part_name_assigned_by_controlling_agencyZINC, RUBBER/TRIM TAB
NSN3110-00-686-1116
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 407R1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
INTERNAL CLEARANCE: 0.0005 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.5
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
OVERALL WIDTH25.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL CLEARANCE0.0005 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.5
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
E4585-1-49Interchangeable
interchangeable cross-reference
interchangeable
D118-7Interchangeable
interchangeable cross-reference
interchangeable
YA236-1086P7Interchangeable
interchangeable cross-reference
interchangeable
2W1973Interchangeable
interchangeable cross-reference
interchangeable
SM2994Interchangeable
interchangeable cross-reference
interchangeable
1187Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 407R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 407R1?
407R1 is a BEARING,BALL,ANNULAR.
What parts can replace 407R1?
There are 18 known substitutes for 407R1: E4585-1-49, D118-7, YA236-1086P7 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 407R1?
407R1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-686-1116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 407R1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026