PartsTable
Technical Data Sheet
Download PDF

4079896 — CLAMP,BRIDGE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4079896: CLAMP,BRIDGE.

The CLAMP,BRIDGE is a the manufacturer industrial component. Key specifications include height: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, material: NICKEL ALLOY OVERALL, hole_diameter: 0.235 INCHES NOMINAL IN, inside_length: 1.550 INCHES NOMINAL IN, overall_width: 0.500 INCHES NOMINAL IN, style_designator: FLAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-495-2971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4079896
NSN: 5340-01-495-2971
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
height0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
materialNICKEL ALLOY OVERALL
hole_diameter0.235 INCHES NOMINAL IN
inside_length1.550 INCHES NOMINAL IN
overall_width0.500 INCHES NOMINAL IN
style_designatorFLAT
end_item_identificationUSED ON F100-PW-229 AIRCRAFT ENGINE
NSN5340-01-495-2971
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4079896 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 1.550 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT
•
HEIGHT: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
MATERIAL: NICKEL ALLOY OVERALL
•
HOLE DIAMETER: 0.235 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INSIDE LENGTH1.550 INCHES NOMINAL IN
STYLE DESIGNATORFLAT
OVERALL WIDTH0.500 INCHES NOMINAL IN
HEIGHT0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONUSED ON F100-PW-229 AIRCRAFT ENGINE
MATERIALNICKEL ALLOY OVERALL
HOLE DIAMETER0.235 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4079896?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4079896?
4079896 is a CLAMP,BRIDGE.
What is the NSN for 4079896?
4079896 is cataloged in the U.S. Government catalog under NSN 5340-01-495-2971. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4079896

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.