PartsTable
Technical Data Sheet
Download PDF

4075590 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4075590: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, end_radius: 0.260 INCHES NOMINAL IN, fork_depth: 0.459 INCHES NOMINAL IN, shank_length: 0.720 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, overall_width: 0.980 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-321-3776, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4075590
NSN: 5340-01-321-3776
NIINs: 013213776, 016435436
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialTITANIUM ALLOY OVERALL
end_radius0.260 INCHES NOMINAL IN
fork_depth0.459 INCHES NOMINAL IN
shank_length0.720 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
overall_width0.980 INCHES NOMINAL IN
thread_length0.430 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.266 INCHES NOMINAL IN
fork_span_width0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.150 INCHES NOMINAL IN
NSN5340-01-321-3776
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4075590 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.266 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.150 INCHES NOMINAL IN
•
END RADIUS: 0.260 INCHES NOMINAL IN
•
THREAD LENGTH: 0.430 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.720 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.266 INCHES NOMINAL IN
FORK SPAN WIDTH0.154 INCHES MINIMUM AND 0.157 INCHES MAXIMUM IN
FORK ARM THICKNESS0.150 INCHES NOMINAL IN
END RADIUS0.260 INCHES NOMINAL IN
THREAD LENGTH0.430 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.720 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.980 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.3125 INCHES ROD CONNECTION IN
SUBSTITUTES & CROSS-REFERENCES 1
5340PL0850040Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4075590?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4075590?
4075590 is a BRACKET,ANGLE.
What parts can replace 4075590?
There is 1 known substitute for 4075590: 5340PL0850040. Substitute compatibility should be verified for your specific system.
What is the NSN for 4075590?
4075590 is cataloged in the U.S. Government catalog under NSN 5340-01-321-3776. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4075590

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.