PartsTable
Technical Data Sheet
PartsTable / O-RING / 407220
407220 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL, body_width: 0.250 INCHES NOMINAL IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, body_length: 0.875 INCHES NOMINAL IN, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.0450 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-118-6361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
407220
NSN: 5331-00-118-6361
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
body_width0.250 INCHES NOMINAL IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.875 INCHES NOMINAL IN
corner_shapeSQUARE OUTSIDE RIGHT CORNER
flange_width0.0450 INCHES NOMINAL IN
overall_length0.2200 INCHES NOMINAL IN
special_featuresGENERIC P/N 54LS153
style_designatorSOLID, EXTERNAL FLANGE ONE END
features_providedMONOLITHIC AND BURN IN AND 3-STATE OUTPUT AND BIPOLAR AND LOW POWER AND SCHOTTKY AND HERMETICALLY SEALED AND POSITIVE OUTPUTS AND W/DECODED OUTPUT AND W/ENABLE AND W/STROBE AND W/TOTEM POLE OUTPUT
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC AND GLASS
NSN5331-00-118-6361
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 407220 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 4.960 INCHES MINIMUM AND 4.990 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
CENTER HOLE DIAMETER4.960 INCHES MINIMUM AND 4.990 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
507624-30Interchangeable
interchangeable cross-reference
interchangeable
G390466-1Interchangeable
interchangeable cross-reference
interchangeable
SNJ54LS153JInterchangeable
interchangeable cross-reference
interchangeable
810AS644Interchangeable
interchangeable cross-reference
interchangeable
100063-012Interchangeable
interchangeable cross-reference
interchangeable
407-220Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 407220?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 407220?
407220 is a MICROCIRCUIT,DIGITAL.
What parts can replace 407220?
There are 6 known substitutes for 407220: 507624-30, G390466-1, SNJ54LS153J and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 407220?
407220 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-118-6361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 407220

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026