PartsTable
Technical Data Sheet
Download PDF

407180183 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

407180183: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_length: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-046-0554, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
407180183
NSN: 5305-01-046-0554
FSC: 5305 — Screws
CAGE: 3226A — RAFAEL (ISR)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT CHAMFER
head_height0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_length0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
fastener_length0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
NSN5305-01-046-0554
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 407180183 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
HEAD HEIGHT0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
FASTENER LENGTH0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.774 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH THREADS
SUBSTITUTES & CROSS-REFERENCES 2
NAS1351-4LP14PReference document
Same NSN cross-reference
Reference document — Secondary reference
10163800Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 407180183?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 407180183?
407180183 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 407180183?
There are 2 known substitutes for 407180183: NAS1351-4LP14P, 10163800. Substitute compatibility should be verified for your specific system.
What is the NSN for 407180183?
407180183 is cataloged in the U.S. Government catalog under NSN 5305-01-046-0554. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 407180183

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.