The TUBE,METALLIC is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, construction: SEAMLESS, first_end_style: OUTSIDE UNDERCUT, second_end_style: SWELLED OR STRETCHED DIAMETER, end_item_identification: F-15 , F-16 AIRCRAFT, first_end_undercut_length: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 4710-01-384-3665, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
4071508
NSN:4710-01-384-3665 FSC:4710 — Pipe, Tube and Rigid Tubing CAGE:77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
material
TITANIUM ALLOY
construction
SEAMLESS
first_end_style
OUTSIDE UNDERCUT
second_end_style
SWELLED OR STRETCHED DIAMETER
special_features
PROOF TEST AT 500.0 PSI WITH WATER, FLUORESCENT PENETRANT, OIL(PMC 9002) // USED ON: F100-PW-229 TURBOFAN ENGINE // T.O.2J-F100-54 F.89 I.62
end_item_identification
F-15 , F-16 AIRCRAFT
first_end_undercut_length
0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
first_end_outside_diameter
0.633 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN
measuring_method_and_length
3.365 INCHES NOMINAL STANDARD IN
second_end_outside_diameter
1.250 INCHES NOMINAL IN
material_document_and_classification
PRATT AND WHITNEY SPEC PWA 1267 MFR REF SINGLE MATERIAL RESPONSE
second_end_relationship_with_first_end
NOT IDENTICAL
NSN
4710-01-384-3665
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 3.365 INCHES NOMINAL STANDARD IN
•
FIRST END STYLE: OUTSIDE UNDERCUT
•
MATERIAL DOCUMENT AND CLASSIFICATION: PRATT AND WHITNEY SPEC PWA 1267 MFR REF SINGLE MATERIAL RESPONSE
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
FIRST END UNDERCUT LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SECOND END OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
SECOND END STYLE: SWELLED OR STRETCHED DIAMETER
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
3.365 INCHES NOMINAL STANDARD IN
FIRST END STYLE
OUTSIDE UNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATION
PRATT AND WHITNEY SPEC PWA 1267 MFR REF SINGLE MATERIAL RESPONSE
SECOND END RELATIONSHIP WITH FIRST END
NOT IDENTICAL
FIRST END UNDERCUT LENGTH
0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SECOND END OUTSIDE DIAMETER
1.250 INCHES NOMINAL IN
SPECIAL FEATURES
PROOF TEST AT 500.0 PSI WITH WATER, FLUORESCENT PENETRANT, OIL(PMC 9002) // USED ON: F100-PW-229 TURBOFAN ENGINE // T.O.2J-F100-54 F.89 I.62
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4071508?
4071508 is a TUBE,METALLIC.
What parts can replace 4071508?
There are 2 known substitutes for 4071508: 4710PL0712088, 4070467. Substitute compatibility should be verified for your specific system.
What is the NSN for 4071508?
4071508 is cataloged in the U.S. Government catalog under NSN 4710-01-384-3665. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.