PartsTable
Technical Data Sheet
Download PDF

4069097P6 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4069097P6: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY 718 OVERALL, shank_length: 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, overall_length: 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN, shank_diameter: 0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN, first_end_style: CHAMFERED, style_designator: SHOULDER. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-305-4622, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4069097P6
NSN: 5315-01-305-4622
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialNICKEL ALLOY 718 OVERALL
shank_length0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
overall_length1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
shank_diameter0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
first_end_styleCHAMFERED
style_designatorSHOULDER
shoulder_diameter0.4871 INCHES MINIMUM AND 0.4872 INCHES MAXIMUM IN
first_end_locationBOTH ENDS
second_shank_length0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
first_end_taper_angle30.0 DEGREES NOMINAL
second_shank_diameter0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
first_end_taper_length0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
NSN5315-01-305-4622
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4069097P6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
•
SECOND SHANK DIAMETER: 0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: AAZE AND CQTR AND AAVH
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
SECOND SHANK DIAMETER0.4690 INCHES MINIMUM AND 0.4691 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
FIRST END STYLECHAMFERED
SHANK LENGTH0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONAAZE AND CQTR AND AAVH
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5663 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4069097P6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4069097P6?
4069097P6 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 4069097P6?
4069097P6 is cataloged in the U.S. Government catalog under NSN 5315-01-305-4622. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4069097P6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.