PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4067D1
4067D1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 0.443 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN, first_end_style: RADIUS, style_designator: CENTER GROOVE, surface_treatment: CADMIUM OVERALL, first_end_location: BOTH ENDS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-449-2945, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4067D1
NSN: 5315-00-449-2945
FSC: 5315
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_length0.443 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
first_end_styleRADIUS
style_designatorCENTER GROOVE
surface_treatmentCADMIUM OVERALL
first_end_locationBOTH ENDS
intermediate_diameter0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
pin_small_end_diameter0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
first_end_corner_radius0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-449-2945
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4067D1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE DIAMETER: 0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PIN SMALL END DIAMETER: 0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
•
FIRST END STYLE: RADIUS
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT: CADMIUM OVERALL
•
FIRST END CORNER RADIUS: 0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERMEDIATE DIAMETER0.096 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
PIN SMALL END DIAMETER0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
FIRST END STYLERADIUS
END ITEM IDENTIFICATIONW/S:HELICOPTER, ADVANCE ATTACK, AH-1W; GENERATOR SET, DIESEL ENGINE, 100KW, PU-495; AIRCRAFT, EAGLE F-15; BENERATOR, 10KW, DIESEL, MILITARY STANDARD FAMILY; AIRCRAFT, C-2A (REPROCURED); RADAR SET, LIGHTWEIGHT 3D (AN/TPS-59); HELICOPTER, MH-53E; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); GENERATOR, 60KW, DIESEL, MILITARY STANDARD FAMILY; RADAR SET, FIREFINDER (AN/TPQ-36) A
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENTCADMIUM OVERALL
FIRST END CORNER RADIUS0.010 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
STYLE DESIGNATORCENTER GROOVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
339088-021Interchangeable
interchangeable cross-reference
interchangeable
224P500-103Interchangeable
interchangeable cross-reference
interchangeable
M39015/1-007PRInterchangeable
interchangeable cross-reference
interchangeable
EInterchangeable
interchangeable cross-reference
interchangeable
MIL-M-3800Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-62/3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4067D1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4067D1?
4067D1 is a PIN,GROOVED,HEADLESS.
What parts can replace 4067D1?
There are 28 known substitutes for 4067D1: 339088-021, 224P500-103, M39015/1-007PR and 25 more. Substitute compatibility should be verified for your specific system.
Is 4067D1 still available?
4067D1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4067D1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026