PartsTable
Technical Data Sheet
Download PDF

4060AS140-7 — NUT,PLAIN,RECTANGULAR

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4060AS140-7: NUT,PLAIN,RECTANGULAR.

The NUT,PLAIN,RECTANGULAR is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 932 OVERALL, nut_style: PLAIN, RECTANGULAR, nut_width: 1.250 INCHES NOMINAL IN, nut_height: 2.000 INCHES NOMINAL IN, nut_length: 1.719 INCHES NOMINAL IN, thread_class: 2G G. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-629-6448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4060AS140-7
NSN: 5310-01-629-6448
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCOPPER ALLOY 932 OVERALL
nut_stylePLAIN, RECTANGULAR
nut_width1.250 INCHES NOMINAL IN
nut_height2.000 INCHES NOMINAL IN
nut_length1.719 INCHES NOMINAL IN
thread_class2G G
thread_seriesACME
thread_directionRIGHT-HAND
nominal_thread_size0.625 INCHES IN
end_item_identificationMHU-23/E
thread_quantity_per_inch8
part_name_assigned_by_controlling_agencyNUT,R.H. ASME
NSN5310-01-629-6448
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4060AS140-7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT WIDTH: 1.250 INCHES NOMINAL IN
•
NUT LENGTH: 1.719 INCHES NOMINAL IN
•
THREAD SERIES: ACME
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 2.000 INCHES NOMINAL IN
•
NUT STYLE: PLAIN, RECTANGULAR
TECHNICAL CHARACTERISTICS
NUT WIDTH1.250 INCHES NOMINAL IN
NUT LENGTH1.719 INCHES NOMINAL IN
THREAD SERIESACME
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT2.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNUT,R.H. ASME
NUT STYLEPLAIN, RECTANGULAR
THREAD CLASS2G G
END ITEM IDENTIFICATIONMHU-23/E
SUBSTITUTES & CROSS-REFERENCES 2
4060AS140 FN 6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4060AS140Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4060AS140-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4060AS140-7?
4060AS140-7 is a NUT,PLAIN,RECTANGULAR.
What parts can replace 4060AS140-7?
There are 2 known substitutes for 4060AS140-7: 4060AS140 FN 6, 4060AS140. Substitute compatibility should be verified for your specific system.
What is the NSN for 4060AS140-7?
4060AS140-7 is cataloged in the U.S. Government catalog under NSN 5310-01-629-6448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4060AS140-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.