PartsTable
Technical Data Sheet
Download PDF

4058-126 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4058-126: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 0.438 INCHES NOMINAL IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-251-0907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4058-126
NSN: 5305-01-251-0907
FSC: 5305 — Screws
CAGE: 43689 — HUNTINGTON INGALLS INC DIV NEWPORT NEWS SHIPBUILDING (USA)
SPECIFICATIONS
head_styleROUND
head_height0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length0.438 INCHES NOMINAL IN
fastener_length0.625 INCHES NOMINAL IN
special_featuresALTERED POINT DIA 0.138 IN.,0.062 IN. LONG; SMALLER DIA 0.062 IN.,0.125 IN. LONG IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentOXIDE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-01-251-0907
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4058-126 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: OXIDE
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: COPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 764 OR COPPER ALLOY 770
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTOXIDE
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALCOPPER ALLOY 230 OR COPPER ALLOY 240 OR COPPER ALLOY 260 OR COPPER ALLOY 268 OR COPPER ALLOY 270 OR COPPER ALLOY 342 OR COPPER ALLOY 353 OR COPPER ALLOY 360 OR COPPER ALLOY 377 OR COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OR COPPER ALLOY 510 OR COPPER ALLOY 745 OR COPPER ALLOY 752 OR COPPER ALLOY 764 OR COPPER ALLOY 770
COLORBLACK
SPECIAL FEATURESALTERED POINT DIA 0.138 IN.,0.062 IN. LONG; SMALLER DIA 0.062 IN.,0.125 IN. LONG IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
FF-S-92, SLOTTE D ROUND HEAD,Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4058-126?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4058-126?
4058-126 is a SCREW,MACHINE.
What parts can replace 4058-126?
There is 1 known substitute for 4058-126: FF-S-92, SLOTTE D ROUND HEAD,. Substitute compatibility should be verified for your specific system.
What is the NSN for 4058-126?
4058-126 is cataloged in the U.S. Government catalog under NSN 5305-01-251-0907. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4058-126