PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 40529
40529 ✓ Verified by PartsTable
Sandberg · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

A Sandberg Design Cover effectively protects your phone against marks and scratches while also giving it a more personal look. Key specifications include length: 0.875 INCHES NOMINAL SHOULDER IN, radius: 0.625 INCHES NOMINAL IN, material: STEEL OVERALL, thickness: 0.032 INCHES NOMINAL IN, body_length: 0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN, tongue_width: 1.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-097-4710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40529
NSN: 5340-00-097-4710
FSC: 5340
CAGE: 24930 — L3HARRIS TECHNOLOGIES, INC DIV SPACE & AIRBORNE SYSTEMS (USA)
SPECIFICATIONS
length0.875 INCHES NOMINAL SHOULDER IN
radius0.625 INCHES NOMINAL IN
materialSTEEL OVERALL
thickness0.032 INCHES NOMINAL IN
body_length0.860 INCHES MINIMUM AND 0.890 INCHES MAXIMUM IN
tongue_width1.250 INCHES NOMINAL IN
hole_diameter0.505 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_length0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
mounting_methodTERMINAL SINGLE GROUP
terminal_length1.500 INCHES MINIMUM IN
frequency_rating400.0 HERTZ NOMINAL SINGLE COMPONENT
NSN5340-00-097-4710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40529 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 1.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SHANK OUTSIDE DIAMETER: 0.974 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CONNECTOR
•
MATERIAL: STEEL COMP 304 OVERALL
•
SECURING PIN HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
BODY OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
LENGTH: 0.875 INCHES NOMINAL SHOULDER IN
TECHNICAL CHARACTERISTICS (FLIS)
TONGUE WIDTH1.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SHANK OUTSIDE DIAMETER0.974 INCHES MINIMUM AND 0.980 INCHES MAXIMUM IN
STYLE DESIGNATORCONNECTOR
MATERIALSTEEL COMP 304 OVERALL
SECURING PIN HOLE DIAMETER0.531 INCHES NOMINAL IN
BODY OVERALL DIAMETER1.500 INCHES NOMINAL IN
LENGTH0.875 INCHES NOMINAL SHOULDER IN
SHANK OVERALL LENGTH12.000 INCHES NOMINAL IN
TONGUE THICKNESS0.515 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
T2306BInterchangeable
interchangeable cross-reference
interchangeable
T2302BInterchangeable
interchangeable cross-reference
interchangeable
40529Interchangeable
interchangeable cross-reference
interchangeable
P18D3529Interchangeable
interchangeable cross-reference
interchangeable
42623Interchangeable
interchangeable cross-reference
interchangeable
40529-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40529?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40529?
40529 is a SEMICONDUCTOR DEVICE,THYRISTOR manufactured by Sandberg.
What parts can replace 40529?
There are 14 known substitutes for 40529: T2306B, T2302B, 40529 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40529?
40529 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-097-4710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40529

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026