PartsTable
Technical Data Sheet
PartsTable / O-RING / 4050417
4050417 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 1.504 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, cross-sectional_height: 0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-853-2376, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4050417
NSN: 5331-00-853-2376
FSC: 5331 — O-RING
CAGE: 0MKW7 — MINNPAR, LLC DBA MINNPAR (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter1.504 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
cross-sectional_height0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
NSN5331-00-853-2376
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4050417 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.504 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.504 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
26SInterchangeable
interchangeable cross-reference
interchangeable
11329Interchangeable
interchangeable cross-reference
interchangeable
99126965Interchangeable
interchangeable cross-reference
interchangeable
19113Interchangeable
interchangeable cross-reference
interchangeable
26965Interchangeable
interchangeable cross-reference
interchangeable
7790Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4050417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4050417?
4050417 is a O-RING.
What parts can replace 4050417?
There are 14 known substitutes for 4050417: 26S, 11329, 99126965 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4050417?
4050417 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-853-2376. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4050417

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026