40451: CUTTER,MILLING,CONVEX.
USB Port Blockers are useful little devices that system administrators can use to physically prevent access to USB ports. USB Port Blockers allow locks to be inserted and removed from USB ports to stop unauthorised users from inserting pen drives, USB mass storage and mobile devices into shared workstations or devices with USB ports in public spaces. To use, simply attach a lock to the key and insert it into the USB port.
Release the sliding mechanism on the key to leave the lock in place. To remove, simply insert the key back into the lock and pull away. Please note: this key is only compatible with the corresponding colour of port blocker This part is cataloged in the U.S.
Government catalog under NSN 3455-00-254-8461, indicating validated use in U.S. government and defense logistics supply chains.
| head_style | FLAT COUNTERSUNK |
| head_height | 1.65 MILLIMETERS MAXIMUM MM |
| head_diameter | 5.3 MILLIMETERS MINIMUM AND 5.6 MILLIMETERS MAXIMUM MM |
| thread_length | 10.0 MILLIMETERS NOMINAL MM |
| screw_material | STEEL |
| fastener_length | 10.0 MILLIMETERS NOMINAL MM |
| thread_direction | RIGHT-HAND |
| countersink_angle | 90.0 DEGREES NOMINAL |
| internal_drive_style | SLOT |
| nominal_thread_diameter | 3.0 MILLIMETERS MM |
| screw_surface_treatment | ZINC |
| thread_series_designator | ISO M |
| NSN | 3455-00-254-8461 |
| MOUNTING HOLE DIAMETER | 1.000 INCHES NOMINAL IN |
| DIAMETER | 2.250 INCHES NOMINAL IN |
| CIRCLE DIAMETER | 0.125 INCHES NOMINAL IN |
| SPECIFICATION/STANDARD DATA | 80204-B94.19 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| MATERIAL | STEEL |
| THICKNESS | 0.125 INCHES NOMINAL IN |