PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 404495-3
404495-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.875 INCHES NOMINAL IN, material: STEEL OVERALL, hole_diameter: 0.281 INCHES NOMINAL IN, overall_height: 2.406 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), surface_treatment: ZINC OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-067-8863, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
404495-3
NSN: 5340-01-067-8863
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.875 INCHES NOMINAL IN
materialSTEEL OVERALL
hole_diameter0.281 INCHES NOMINAL IN
overall_height2.406 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentZINC OVERALL
loop/holding_dimension1.062 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN
distance_from_loop_center_to_end1.156 INCHES NOMINAL IN
NSN5340-01-067-8863
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 404495-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 0.875 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.281 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 1.156 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LOOP/HOLDING DIMENSION: 1.062 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH0.875 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.281 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END1.156 INCHES NOMINAL IN
OVERALL HEIGHT2.406 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
LOOP/HOLDING DIMENSION1.062 INCHES MINIMUM AND 1.344 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
115KSInterchangeable
interchangeable cross-reference
interchangeable
219518Interchangeable
interchangeable cross-reference
interchangeable
903015Interchangeable
interchangeable cross-reference
interchangeable
21370-1057Interchangeable
interchangeable cross-reference
interchangeable
2139Interchangeable
interchangeable cross-reference
interchangeable
8898502Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 404495-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 404495-3?
404495-3 is a CLIP,SPRING TENSION.
What parts can replace 404495-3?
There are 16 known substitutes for 404495-3: 115KS, 219518, 903015 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 404495-3?
404495-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-067-8863. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 404495-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026