PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 404495-2
404495-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_treatment: ZINC OVERALL, loop/holding_dimension: 2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-187-9035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
404495-2
NSN: 5340-00-187-9035
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_treatmentZINC OVERALL
loop/holding_dimension2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
NSN5340-00-187-9035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 404495-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP/HOLDING DIMENSION: 2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
LOOP/HOLDING DIMENSION2.688 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
H250Interchangeable
interchangeable cross-reference
interchangeable
MIL-H-11049Interchangeable
interchangeable cross-reference
interchangeable
M600I234Interchangeable
interchangeable cross-reference
interchangeable
R212Interchangeable
interchangeable cross-reference
interchangeable
TV3LInterchangeable
interchangeable cross-reference
interchangeable
HSL3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 404495-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 404495-2?
404495-2 is a CLIP,SPRING TENSION.
What parts can replace 404495-2?
There are 8 known substitutes for 404495-2: H250, MIL-H-11049, M600I234 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 404495-2?
404495-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-187-9035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 404495-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026