PartsTable
Technical Data Sheet
PartsTable / MRO / 40418
40418 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include thread_length: 3.5 MILLIMETERS MM, outside_thread_diameter: 18.0 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-239-3433, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 40418
NSN: 5999-00-239-3433
FSC: 5999
CAGE: 18565 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV CHOMERICS DIVISION (USA)
SPECIFICATIONS
thread_length3.5 MILLIMETERS MM
outside_thread_diameter18.0 MILLIMETERS NOMINAL MM
NSN5999-00-239-3433
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 40418 MFR Sandberg RESISTOR,VARIABLE,NONWIRE WOUND,
KEY FEATURES
•
OUTSIDE CORNER RADIUS: 0.160 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.124 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
APERTURE DIAMETER: 1.125 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.124 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.063 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE CORNER RADIUS0.160 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.124 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
APERTURE DIAMETER1.125 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.124 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH1.312 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.063 INCHES NOMINAL IN
HOLE DIAMETER0.130 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.063 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
FL-E0012-085Upgraded Successor
successor cross-reference
successor
01Upgraded Successor
successor cross-reference
successor
SB11-132Upgraded Successor
successor cross-reference
successor
07-0901-0193Upgraded Successor
successor cross-reference
successor
75-193-1-8MINUpgraded Successor
successor cross-reference
successor
8438327-5Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 40418?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40418?
40418 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 40418?
There are 20 known substitutes for 40418: FL-E0012-085, 01, SB11-132 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40418?
40418 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-239-3433. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40418

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026