PartsTable
Technical Data Sheet
Download PDF

4041110-1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4041110-1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.193 INCHES NOMINAL IN, lug_width: 1.530 INCHES NOMINAL IN, style_designator: RIGHT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED, lug_hole_diameter: 0.437 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN, loop_inside_diameter: 3.060 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-330-7831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4041110-1
NSN: 5340-00-330-7831
FSC: 5340 — Hardware, Commercial
CAGE: 7EK50 — TEXTRON AVIATION INC (USA)
SPECIFICATIONS
diameter0.193 INCHES NOMINAL IN
lug_width1.530 INCHES NOMINAL IN
style_designatorRIGHT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.437 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
loop_inside_diameter3.060 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end2.220 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.760 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.910 INCHES NOMINAL IN
NSN5340-00-330-7831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4041110-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.437 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.760 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RIGHT HAND CLAMP & BRACKET
•
DIAMETER: 0.193 INCHES NOMINAL IN
•
LUG WIDTH: 1.530 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 2.220 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.910 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.437 INCHES MINIMUM AND 0.443 INCHES MAXIMUM IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.760 INCHES NOMINAL IN
STYLE DESIGNATORRIGHT HAND CLAMP & BRACKET
DIAMETER0.193 INCHES NOMINAL IN
LUG WIDTH1.530 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END2.220 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.910 INCHES NOMINAL IN
LOOP INSIDE DIAMETER3.060 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4041110-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4041110-1?
4041110-1 is a CLAMP,LOOP.
What is the NSN for 4041110-1?
4041110-1 is cataloged in the U.S. Government catalog under NSN 5340-00-330-7831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4041110-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.