PartsTable
Technical Data Sheet
Download PDF

4039-2047 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4039-2047: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 11.000 INCHES NOMINAL IN, aperture_width: 7.750 INCHES NOMINAL IN, overall_length: 18.750 INCHES NOMINAL IN, aperture_length: 8.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-367-3676, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4039-2047
NSN: 5330-00-367-3676
FSC: 5330 — Packing and Gasket Materials
CAGE: 93568 — HARSCO CORP BMY-COMBAT SYSTEMS DIV (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width11.000 INCHES NOMINAL IN
aperture_width7.750 INCHES NOMINAL IN
overall_length18.750 INCHES NOMINAL IN
aperture_length8.125 INCHES NOMINAL IN
special_featuresTWO BOLT HOLES 0.719 IN. DIA IN
bolt_hole_quantity6
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-367-3676
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4039-2047 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 7.750 INCHES NOMINAL IN
•
APERTURE LENGTH: 8.125 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 6
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS
OVERALL LENGTH18.750 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH11.000 INCHES NOMINAL IN
APERTURE WIDTH7.750 INCHES NOMINAL IN
APERTURE LENGTH8.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY6
SPECIAL FEATURESTWO BOLT HOLES 0.719 IN. DIA IN
MATERIALPAPER OVERALL
HOLE DIAMETER0.531 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 3
04039-2047Reference document
Same NSN cross-reference
Reference document — Secondary reference
4660429Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M60429Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 4039-2047?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4039-2047?
4039-2047 is a GASKET.
What parts can replace 4039-2047?
There are 3 known substitutes for 4039-2047: 04039-2047, 4660429, M60429. Substitute compatibility should be verified for your specific system.
What is the NSN for 4039-2047?
4039-2047 is cataloged in the U.S. Government catalog under NSN 5330-00-367-3676. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4039-2047