PartsTable
Technical Data Sheet
Download PDF

4037T92P02 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4037T92P02: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include shank_length: 0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.190 INCHES NOMINAL IN, thread_length: 0.250 INCHES NOMINAL ROD CONNECTION IN, overall_height: 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, shank_diameter: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-100-2944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4037T92P02
NSN: 5340-01-100-2944
FSC: 5340 — Hardware, Commercial
CAGE: 99207 — GENERAL ELECTRIC COMPANY DBA GE AEROSPACE (USA)
SPECIFICATIONS
shank_length0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
thread_class3A ROD CONNECTION A
hole_diameter0.190 INCHES NOMINAL IN
thread_length0.250 INCHES NOMINAL ROD CONNECTION IN
overall_height0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
shank_diameter0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
fork_span_width0.252 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
thread_directionRIGHT-HAND ROD CONNECTION
nominal_thread_size0.250 INCHES ROD CONNECTION IN
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
distance_from_pivot_pinhole_center_to_rod_connection_end1.112 INCHES MINIMUM AND 1.138 INCHES MAXIMUM IN
NSN5340-01-100-2944
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4037T92P02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.252 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.250 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.250 INCHES ROD CONNECTION IN
•
THREAD CLASS: 3A ROD CONNECTION A
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
OVERALL HEIGHT0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
FORK SPAN WIDTH0.252 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
THREAD LENGTH0.250 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.675 INCHES MINIMUM AND 0.695 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.250 INCHES ROD CONNECTION IN
THREAD CLASS3A ROD CONNECTION A
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) ROD CONNECTION
HOLE DIAMETER0.190 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation
Ready to buy 4037T92P02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4037T92P02?
4037T92P02 is a CLEVIS,ROD END.
What is the NSN for 4037T92P02?
4037T92P02 is cataloged in the U.S. Government catalog under NSN 5340-01-100-2944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4037T92P02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.