PartsTable
Technical Data Sheet
Download PDF

4036-011 — BUSHING,SLEEVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4036-011: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.375 INCHES MINIMUM IN, screw_material: STEEL COMP 303, fastener_length: 2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-187-5981, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4036-011
NSN: 5305-00-187-5981
NIINs: 001875981, 014866679
FSC: 5305 — Screws
CAGE: 00752 — L3HARRIS TECHNOLOGIES, INC. DBA HARRIS CORP DIV ANTENNA PRODUCTS (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
thread_length0.375 INCHES MINIMUM IN
screw_materialSTEEL COMP 303
fastener_length2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.188 INCHES NOMINAL IN
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
thread_quantity_per_inch40
NSN5305-00-187-5981
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4036-011 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: PASSIVATE
•
FASTENER LENGTH: 2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
FASTENER LENGTH2.219 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.375 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.188 INCHES NOMINAL IN
SCREW MATERIALSTEEL COMP 303
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4036-011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4036-011?
4036-011 is a BUSHING,SLEEVE.
What is the NSN for 4036-011?
4036-011 is cataloged in the U.S. Government catalog under NSN 5305-00-187-5981. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4036-011

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.