PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4036-010
4036-010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, connection_type: UNTHREADED INTERNAL PIPE FIRST END, connection_style: PLAIN (PIPE) SECOND END, style_designator: PLAIN, nominal_thread_size: 1.000 INCHES SECOND END IN, nominal_overall_length: 2.188 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-377-5864, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4036-010
NSN: 5340-00-377-5864
FSC: 5340
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
connection_typeUNTHREADED INTERNAL PIPE FIRST END
connection_stylePLAIN (PIPE) SECOND END
style_designatorPLAIN
nominal_thread_size1.000 INCHES SECOND END IN
nominal_overall_length2.188 INCHES IN
thread_series_designatorNPT SECOND END
nominal_pipe_size_accommodated1.000 INCHES FIRST END IN
material_document_and_classificationASTM D1784,TY 1,GR1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
pipe_wall_thickness_designation_for_which_designedSCHEDULE 40 FIRST END
NSN5340-00-377-5864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4036-010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
•
FIRST LEG LENGTH: 0.790 INCHES NOMINAL IN
•
FIRST LEG SLOT LENGTH: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
•
FIRST LEG CORNER RADIUS: 0.250 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.891 INCHES NOMINAL IN
•
FIRST LEG THICKNESS: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: CORNER RADIUS
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
FIRST LEG LENGTH0.790 INCHES NOMINAL IN
FIRST LEG SLOT LENGTH0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
FIRST LEG CORNER RADIUS0.250 INCHES NOMINAL IN
SECOND LEG LENGTH0.891 INCHES NOMINAL IN
FIRST LEG THICKNESS0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
FIRST LEG STYLECORNER RADIUS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
08217009Interchangeable
interchangeable cross-reference
interchangeable
4036-010Interchangeable
interchangeable cross-reference
interchangeable
ASTMD2466-69Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4036-010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4036-010?
4036-010 is a BUSHING,SLEEVE.
What parts can replace 4036-010?
There are 3 known substitutes for 4036-010: 08217009, 4036-010, ASTMD2466-69. Substitute compatibility should be verified for your specific system.
What is the NSN for 4036-010?
4036-010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-377-5864. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4036-010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026