PartsTable
Technical Data Sheet
Download PDF

4035924 — KEY,MACHINE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4035924: KEY,MACHINE.

The KEY,MACHINE is a the manufacturer industrial component. Key specifications include overall_width: 0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN, overall_height: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, overall_length: 0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN, style_designator: PLAIN, key_chamfer_angle: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM, key_chamfer_length: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-395-7404, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4035924
NSN: 5315-00-395-7404
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
overall_width0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
overall_height0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
overall_length0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
style_designatorPLAIN
key_chamfer_angle40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
key_chamfer_length0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
starting_edge_shapeCHAMFERED
material_document_and_classificationAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-395-7404
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4035924 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
KEY CHAMFER ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
STARTING EDGE SHAPE: CHAMFERED
•
STYLE DESIGNATOR: PLAIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
KEY CHAMFER LENGTH: 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
KEY CHAMFER ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
STARTING EDGE SHAPECHAMFERED
STYLE DESIGNATORPLAIN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5596 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH0.675 INCHES MINIMUM AND 0.685 INCHES MAXIMUM IN
OVERALL WIDTH0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
KEY CHAMFER LENGTH0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4035924?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4035924?
4035924 is a KEY,MACHINE.
What is the NSN for 4035924?
4035924 is cataloged in the U.S. Government catalog under NSN 5315-00-395-7404. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4035924