PartsTable
Technical Data Sheet
Download PDF

4035421 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

4035421: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL BALL, bore_shape: STRAIGHT, flange_width: 0.2500 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM IN, bore_diameter: 6.1021 INCHES MINIMUM AND 6.1024 INCHES MAXIMUM IN, contact_angle: 30.0 DEGREES NOMINAL, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-345-6018, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4035421
NSN: 3110-00-345-6018
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL BALL
bore_shapeSTRAIGHT
flange_width0.2500 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM IN
bore_diameter6.1021 INCHES MINIMUM AND 6.1024 INCHES MAXIMUM IN
contact_angle30.0 DEGREES NOMINAL
load_directionANGULAR
surface_finishGROUND
inner_ring_width1.6860 INCHES NOMINAL IN
outer_ring_width1.4073 INCHES MINIMUM AND 1.4173 INCHES MAXIMUM IN
special_featuresEACH ASSEMBLY CONTAINS 2 INNER RACES,AN OUTER RACE,A ROLLER CAGE,AND A SET OF ROLLERS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
precious_materialSILVER
NSN3110-00-345-6018
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 4035421 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
OUTER RING WIDTH: 1.4073 INCHES MINIMUM AND 1.4173 INCHES MAXIMUM IN
•
INTERNAL CLEARANCE: 0.0098 INCHES MINIMUM RADIAL AND 0.0116 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 10.0500 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
PRECIOUS MATERIAL: SILVER
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: PWA 725,97497 MFR REF 1ST MATERIAL RESPONSE BALL
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODMACHINED
OUTER RING WIDTH1.4073 INCHES MINIMUM AND 1.4173 INCHES MAXIMUM IN
INTERNAL CLEARANCE0.0098 INCHES MINIMUM RADIAL AND 0.0116 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER10.0500 INCHES NOMINAL IN
SURFACE FINISHGROUND
PRECIOUS MATERIALSILVER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONPWA 725,97497 MFR REF 1ST MATERIAL RESPONSE BALL
MATERIAL DOCUMENT AND CLASSIFICATIONPWA 725,97497 MFR REF 2ND MATERIAL RESPONSE INNER RING
MATERIAL DOCUMENT AND CLASSIFICATIONPWA 725,97497 MFR REF 3RD MATERIAL RESPONSE OUTER RING
SUBSTITUTES & CROSS-REFERENCES 3
4056777Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4000430Reference document
Same NSN cross-reference
Reference document — Secondary reference
4048700Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation + specific procedure
Ready to buy 4035421?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4035421?
4035421 is a BEARING,BALL,ANNULAR.
What parts can replace 4035421?
There are 3 known substitutes for 4035421: 4056777, 4000430, 4048700. Substitute compatibility should be verified for your specific system.
What is the NSN for 4035421?
4035421 is cataloged in the U.S. Government catalog under NSN 3110-00-345-6018. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4035421