PartsTable
Technical Data Sheet
Download PDF

4033331 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4033331: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 9254 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, bore_diameter: 1.220 INCHES NOMINAL IN, coil_quantity: 19, inside_diameter: 0.720 INCHES NOMINAL IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-415-5313, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4033331
NSN: 5340-00-415-5313
NIINs: 004155313, 006703480
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 9254 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
bore_diameter1.220 INCHES NOMINAL IN
coil_quantity19
inside_diameter0.720 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length6.593 INCHES MINIMUM AND 6.803 INCHES MAXIMUM IN
spring_solid_length3.940 INCHES NOMINAL IN
coil_helix_directionRIGHT-HAND
accommodated_rod_diameter0.630 INCHES NOMINAL IN
spring_free_outside_diameter1.110 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
spring_solid_outside_diameter0.918 INCHES NOMINAL IN
NSN5340-00-415-5313
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4033331 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.300 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
SECOND LEG WIDTH: 0.600 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 2.050 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.300 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
SECOND LEG WIDTH0.600 INCHES NOMINAL IN
SECOND LEG LENGTH2.050 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.300 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 4033331?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4033331?
4033331 is a BRACKET,ANGLE.
What is the NSN for 4033331?
4033331 is cataloged in the U.S. Government catalog under NSN 5340-00-415-5313. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4033331

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.