PartsTable
Technical Data Sheet
Download PDF

4032696 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4032696: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, mounting_hole_type: PLAIN, first_leg_thickness: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, second_leg_thickness: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, first_leg_hole_diameter: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN, second_leg_hole_diameter: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-373-3498, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4032696
NSN: 5340-00-373-3498
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
special_features1ST LEG CONTAINS AN EXTRA LEG PROJECTING FROM IT,1.400 IN. WIDE,3RD LEG CONTAINS A SLOT,0.198 IN. MIN TO 0.208 IN. MAX SLOT WIDTH IN
mounting_hole_typePLAIN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_hole_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
second_leg_hole_diameter0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_hole_arrangement_styleONE HOLE
material_document_and_classificationAMS 4911 NATIONAL SPEC SINGLE MATERIAL RESPONSE
second_leg_relationship_to_first_legNOT IDENTICAL
first_leg_distance_between_hole_centers_along_width1.382 INCHES NOMINAL IN
NSN5340-00-373-3498
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4032696 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.382 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4911 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
SECOND LEG THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
FIRST LEG THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.382 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4911 NATIONAL SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
SPECIAL FEATURES1ST LEG CONTAINS AN EXTRA LEG PROJECTING FROM IT,1.400 IN. WIDE,3RD LEG CONTAINS A SLOT,0.198 IN. MIN TO 0.208 IN. MAX SLOT WIDTH IN
MATERIALTITANIUM ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4032696?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4032696?
4032696 is a BRACKET,ANGLE.
What is the NSN for 4032696?
4032696 is cataloged in the U.S. Government catalog under NSN 5340-00-373-3498. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4032696

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.