The Terminal,rope,swaging, cataloged under National Stock Number 4030-00-273-3611, is classified within Federal Supply Class 4030 (Fittings for Rope, Cable, and Chain) of the Rope, Cable, Chain, and Fittings group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 4030-00-273-3611 |
| Item Name | Terminal,rope,swaging |
| FSC / FSG | 4030 / 40 — Fittings for Rope, Cable, and Chain |
| Status | ACTIVE |
| Length From Pinhole Center to End | 1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-T-781 FED SPEC SINGLE TREATMENT RESPONSE |
| Style Designator | BALL END |
| Bolt Hole Diameter | 0.142 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Material Document and Classification | 66 FED STD ALL MATERIAL RESPONSES |
| Accommodated Material Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Inside Diameter | 0.141 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE |
| Material | STEEL COMP 303SE AND STEEL COMP 305 |
| Breaking Strength | 000.0 HARNESS GROUP 2 |
| Plain Shank Diameter | 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MIL-DTL-781 | 4/1 Identification reference U.S. Government activity |
| NAS287-35-4 | 3/2 Design control — primary reference U.S. Government activity |
NSN 4030-00-273-3611 is a Terminal,rope,swaging, classified under FSC 4030, Fittings for Rope, Cable, and Chain. Status: active.
Key specifications for 4030-00-273-3611: Overall Height: 0.290 INCHES MINIMUM AND 0.293 INCHES MAXIMUM IN; Length From Pinhole Center to End: 1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-T-781 FED SPEC SINGLE TREATMENT RESPONSE; Style Designator: BALL END. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.