PartsTable
Technical Data Sheet
Download PDF

4027P11 — BEARING,SLEEVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

4027P11: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, overall_length: 0.7500 INCHES NOMINAL IN, special_features: KNURL 0.125 IN. W,0.188 IN.

FROM LEFT END IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 0.5010 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM IN. This part is cataloged in the U.S. Government catalog under NSN 5305-00-207-2226, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4027P11
NSN: 5305-00-207-2226
NIINs: 002072226, 003368806
FSC: 5305 — Screws
CAGE: 27618 — TAYLOR MACHINE WORKS INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE ALL CORNERS
overall_length0.7500 INCHES NOMINAL IN
special_featuresKNURL 0.125 IN. W,0.188 IN. FROM LEFT END IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter0.5010 INCHES MINIMUM AND 0.5020 INCHES MAXIMUM IN
body_outside_diameter0.6240 INCHES MINIMUM AND 0.6245 INCHES MAXIMUM IN
lubricant_accommodation_styleGROOVED OPEN ONE END
surface_groove_location_and_quantity1 INTERNAL
NSN5305-00-207-2226
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 4027P11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.500 INCHES NOMINAL IN
•
POINT LENGTH: 0.312 INCHES NOMINAL IN
•
FASTENER LENGTH: 3.250 INCHES NOMINAL IN
•
THREAD LENGTH: 2.781 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.875 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: DOG
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.500 INCHES NOMINAL IN
POINT LENGTH0.312 INCHES NOMINAL IN
FASTENER LENGTH3.250 INCHES NOMINAL IN
THREAD LENGTH2.781 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.875 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEDOG
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 2
132786Reference document
Same NSN cross-reference
Reference document — Secondary reference
10X382Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4027P11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4027P11?
4027P11 is a BEARING,SLEEVE.
What parts can replace 4027P11?
There are 2 known substitutes for 4027P11: 132786, 10X382. Substitute compatibility should be verified for your specific system.
What is the NSN for 4027P11?
4027P11 is cataloged in the U.S. Government catalog under NSN 5305-00-207-2226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4027P11