PartsTable
Technical Data Sheet
Download PDF

4026686 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4026686: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM IN, style_designator: ANGLE, second_leg_length: 1.253 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN, first_leg_thickness: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-382-8330, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4026686
NSN: 5340-00-382-8330
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length1.185 INCHES MINIMUM AND 1.195 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.253 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
first_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
second_leg_thickness0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
second_leg_slot_width0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
second_leg_slot_length0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
first_leg_hole_diameter0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_hole_arrangement_styleONE SLOT
NSN5340-00-382-8330
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4026686 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.300 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.204 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.253 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
•
SECOND LEG SLOT WIDTH: 0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 1.713 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.204 INCHES NOMINAL IN
SECOND LEG LENGTH1.253 INCHES MINIMUM AND 1.263 INCHES MAXIMUM IN
SECOND LEG SLOT WIDTH0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH1.713 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4911 ASSN STD SINGLE MATERIAL RESPONSE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — critical (Q)
Ready to buy 4026686?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4026686?
4026686 is a BRACKET,ANGLE.
What is the NSN for 4026686?
4026686 is cataloged in the U.S. Government catalog under NSN 5340-00-382-8330. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4026686

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.