PartsTable
Technical Data Sheet
Download PDF

4025894-1 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4025894-1: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY, overall_width: 1.250 INCHES NOMINAL IN, overall_height: 2.250 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, mounting_hole_diameter: 0.280 INCHES NOMINAL IN, end_item_identification: 5411-01-473-5051; SHELTER, LMS, TY 1. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-549-0010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4025894-1
NSN: 5340-01-549-0010
FSC: 5340 — Hardware, Commercial
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
overall_width1.250 INCHES NOMINAL IN
overall_height2.250 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
mounting_hole_diameter0.280 INCHES NOMINAL IN
mounting_hole_quantity2
end_item_identification5411-01-473-5051; SHELTER, LMS, TY 1
part_name_assigned_by_controlling_agencyBRACKET, LADDER
NSN5340-01-549-0010
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4025894-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
MOUNTING HOLE DIAMETER: 0.280 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
OVERALL HEIGHT2.250 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.280 INCHES NOMINAL IN
OVERALL LENGTH2.000 INCHES NOMINAL IN
OVERALL WIDTH1.250 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET, LADDER
END ITEM IDENTIFICATION5411-01-473-5051; SHELTER, LMS, TY 1
MATERIALALUMINUM ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 4025894-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4025894-1?
4025894-1 is a BRACKET,MOUNTING.
What is the NSN for 4025894-1?
4025894-1 is cataloged in the U.S. Government catalog under NSN 5340-01-549-0010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4025894-1