PartsTable
Technical Data Sheet
Download PDF

4025303-1 — GEAR,HELICAL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

4025303-1: GEAR,HELICAL.

The GEAR,HELICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_style: TAPERED W/KEYWAY BOTH ENDS, teeth_type: SINGLE HELIX, pitch_diameter: 5.0468 INCHES NOMINAL IN, teeth_quantity: 52, tooth_direction: RIGHT. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-110-9616, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4025303-1
NSN: 3020-00-110-9616
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_styleTAPERED W/KEYWAY BOTH ENDS
teeth_typeSINGLE HELIX
pitch_diameter5.0468 INCHES NOMINAL IN
teeth_quantity52
tooth_directionRIGHT
special_features0.788 IN. TAPOR MAJOR DIA;11.0 DIAMETRALPITCH IN
style_designatorONE PROTRUDING HUB, ONE RECESSED HUB
face_nominal_width0.688 INCHES IN
hub_nominal_diameter1.3125 INCHES BOTH ENDS IN
hub_style_designatorPLAIN BOTH ENDS
keyway_nominal_width0.1563 INCHES BOTH ENDS IN
NSN3020-00-110-9616
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,HELICAL TITLE COMPONENT PN 4025303-1 MFR GEAR,HELICAL
KEY FEATURES
•
KEYWAY NOMINAL WIDTH: 0.1563 INCHES BOTH ENDS IN
•
HUB NOMINAL DIAMETER: 1.3125 INCHES BOTH ENDS IN
•
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END: 0.1875 INCHES SECOND END IN
•
TEETH QUANTITY: 52
•
TOOTH DIRECTION: RIGHT
•
BORE STYLE: TAPERED W/KEYWAY BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.250 INCHES FIRST END IN
•
TEETH TYPE: SINGLE HELIX
TECHNICAL CHARACTERISTICS
KEYWAY NOMINAL WIDTH0.1563 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER1.3125 INCHES BOTH ENDS IN
NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END0.1875 INCHES SECOND END IN
TEETH QUANTITY52
TOOTH DIRECTIONRIGHT
BORE STYLETAPERED W/KEYWAY BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.250 INCHES FIRST END IN
TEETH TYPESINGLE HELIX
STYLE DESIGNATORONE PROTRUDING HUB, ONE RECESSED HUB
PITCH DIAMETER5.0468 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
74025303Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
4025303Reference document
Same NSN cross-reference
Reference document — Secondary reference
74025303-4Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 4025303-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4025303-1?
4025303-1 is a GEAR,HELICAL.
What parts can replace 4025303-1?
There are 3 known substitutes for 4025303-1: 74025303, 4025303, 74025303-4. Substitute compatibility should be verified for your specific system.
What is the NSN for 4025303-1?
4025303-1 is cataloged in the U.S. Government catalog under NSN 3020-00-110-9616. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4025303-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.