PartsTable
Technical Data Sheet
Download PDF

4025169 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4025169: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, shank_length: 0.165 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.165 INCHES NOMINAL IN, overall_length: 1.032 INCHES NOMINAL IN, shank_diameter: 0.190 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-373-3570, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4025169
NSN: 5315-00-373-3570
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL OVERALL
shank_length0.165 INCHES NOMINAL IN
thread_class3A A
thread_length0.165 INCHES NOMINAL IN
overall_length1.032 INCHES NOMINAL IN
shank_diameter0.190 INCHES NOMINAL IN
undercut_width0.070 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorUNDERCUT
thread_directionRIGHT-HAND
undercut_diameter0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
NSN5315-00-373-3570
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4025169 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.190 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 0.219 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.070 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
FIRST END LOCATION: THREADED END
•
SECOND END TAPER ANGLE: 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
THREAD LENGTH: 0.165 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.190 INCHES NOMINAL IN
SECOND SHANK DIAMETER0.219 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
UNDERCUT WIDTH0.070 INCHES NOMINAL IN
UNDERCUT DIAMETER0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
FIRST END LOCATIONTHREADED END
SECOND END TAPER ANGLE40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
THREAD LENGTH0.165 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH0.165 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 4025169?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4025169?
4025169 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 4025169?
4025169 is cataloged in the U.S. Government catalog under NSN 5315-00-373-3570. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4025169