PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4024167-1
4024167-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STAY,LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 1.250 INCHES NOMINAL IN, style_designator: FRICTION TYPE, operational_direction: LEFT-HAND, mounting_hole_diameter: 0.266 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-166-8645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4024167-1
NSN: 5340-00-166-8645
FSC: 5340
CAGE: 29381 — GICHNER SYSTEMS GROUP, INC. DIV C5ISR DIVISION (USA)
SPECIFICATIONS
materialSTEEL
overall_width1.250 INCHES NOMINAL IN
offset_quantity3
style_designatorFRICTION TYPE
operational_directionLEFT-HAND
mounting_hole_diameter0.266 INCHES NOMINAL IN
NSN5340-00-166-8645
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4024167-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FRICTION TYPE
•
MATERIAL: STEEL
•
MOUNTING HOLE DIAMETER: 0.266 INCHES NOMINAL IN
•
OPERATIONAL DIRECTION: LEFT-HAND
•
OFFSET QUANTITY: 3
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFRICTION TYPE
MATERIALSTEEL
MOUNTING HOLE DIAMETER0.266 INCHES NOMINAL IN
OVERALL WIDTH1.250 INCHES NOMINAL IN
OPERATIONAL DIRECTIONLEFT-HAND
OFFSET QUANTITY3
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
0097831-FH00-001Interchangeable
interchangeable cross-reference
interchangeable
10134068Interchangeable
interchangeable cross-reference
interchangeable
AMS-DTL-23053/5Interchangeable
interchangeable cross-reference
interchangeable
1339AS513-1Interchangeable
Same NIIN cross-reference
interchangeable
4000200Interchangeable
Same NIIN cross-reference
interchangeable
LH446Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4024167-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4024167-1?
4024167-1 is a STAY,LOCKING.
What parts can replace 4024167-1?
There are 6 known substitutes for 4024167-1: 0097831-FH00-001, 10134068, AMS-DTL-23053/5 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4024167-1?
4024167-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-166-8645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4024167-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026