PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4024-32-00
4024-32-00 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.512 INCHES MINIMUM AND 0.529 INCHES MAXIMUM IN, outside_diameter: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL AND INTERNAL TEETH, material_thickness: 0.050 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-988-7516, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4024-32-00
NSN: 5310-00-988-7516
FSC: 5310
CAGE: 78189 — ITW SHAKEPROOF AUTOMOTIVE PRODUCTS (USA)
SPECIFICATIONS
hole_diameter0.512 INCHES MINIMUM AND 0.529 INCHES MAXIMUM IN
outside_diameter1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL AND INTERNAL TEETH
material_thickness0.050 INCHES NOMINAL IN
NSN5310-00-988-7516
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4024-32-00 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL COMP 1050 OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL AND INTERNAL TEETH
•
OUTSIDE DIAMETER: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.512 INCHES MINIMUM AND 0.529 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL COMP 1050 OVERALL
STYLE DESIGNATORFLAT EXTERNAL AND INTERNAL TEETH
OUTSIDE DIAMETER1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN
HOLE DIAMETER0.512 INCHES MINIMUM AND 0.529 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
193-48Interchangeable
interchangeable cross-reference
interchangeable
4024-32-00Interchangeable
interchangeable cross-reference
interchangeable
9F5601Interchangeable
Same NIIN cross-reference
interchangeable
905631-26Interchangeable
Same NIIN cross-reference
interchangeable
4024-32-00-0541Interchangeable
Same NIIN cross-reference
interchangeable
5310009887516Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4024-32-00?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4024-32-00?
4024-32-00 is a WASHER,LOCK.
What parts can replace 4024-32-00?
There are 6 known substitutes for 4024-32-00: 193-48, 4024-32-00, 9F5601 and 3 more. Substitute compatibility should be verified for your specific system.
Is 4024-32-00 still available?
4024-32-00 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4024-32-00

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026