PartsTable
Technical Data Sheet
Download PDF

402368 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

402368: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: ASBESTOS OVERALL, hole_diameter: 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.255 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, bolt_circle_diameter: 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN, outside_corner_radius: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-070-6862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
402368
NSN: 5330-00-070-6862
NIINs: 000706862, 016547951
FSC: 5330 — Packing and Gasket Materials
CAGE: 08179 — GARRETT TRANSPORTATION I, INC. (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
hole_diameter0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.255 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
bolt_hole_quantity2
bolt_circle_diameter1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
outside_corner_radius0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
NSN5330-00-070-6862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 402368 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.255 INCHES MINIMUM AND 2.265 INCHES MAXIMUM IN
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
MATERIALASBESTOS OVERALL
HOLE DIAMETER0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 402368?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402368?
402368 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 402368?
402368 is cataloged in the U.S. Government catalog under NSN 5330-00-070-6862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402368

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.