PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 402342-2
402342-2 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The REMOVER,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include end_item_identification: ITT CANNON COMBO-D D-SUBMINIATURE FRONT RELEASE RECTANGULAR CONNECTORS, contact_size_for_which_designed: COAXIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-662-2625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
402342-2
NSN: 5306-00-662-2625
FSC: 5306
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
end_item_identificationITT CANNON COMBO-D D-SUBMINIATURE FRONT RELEASE RECTANGULAR CONNECTORS
contact_size_for_which_designedCOAXIAL
NSN5306-00-662-2625
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 402342-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER LENGTH: 6.180 INCHES NOMINAL FIRST SHOULDER IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD LENGTH: 0.995 INCHES NOMINAL IN
•
HEAD DIAMETER: 2.100 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 20
•
MATERIAL: STEEL COMP 4340 OVERALL
•
SURFACE TREATMENT: CADMIUM OVERALL
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 6.775 INCHES NOMINAL FIRST HOLE IN
TECHNICAL CHARACTERISTICS (FLIS)
SHOULDER LENGTH6.180 INCHES NOMINAL FIRST SHOULDER IN
HEAD STYLEFLAT CHAMFER
THREAD LENGTH0.995 INCHES NOMINAL IN
HEAD DIAMETER2.100 INCHES NOMINAL IN
THREAD QUANTITY PER INCH20
MATERIALSTEEL COMP 4340 OVERALL
SURFACE TREATMENTCADMIUM OVERALL
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER6.775 INCHES NOMINAL FIRST HOLE IN
SHANK UNTHREADED HOLE DIAMETER0.124 INCHES MINIMUM AND 0.129 INCHES MAXIMUM FIRST HOLE IN
SHOULDER SHAPEROUND FIRST SHOULDER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
402-3422Interchangeable
interchangeable cross-reference
interchangeable
070064-0000Interchangeable
interchangeable cross-reference
interchangeable
DRK38Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 402342-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402342-2?
402342-2 is a REMOVER,ELECTRICAL CONTACT.
What parts can replace 402342-2?
There are 3 known substitutes for 402342-2: 402-3422, 070064-0000, DRK38. Substitute compatibility should be verified for your specific system.
What is the NSN for 402342-2?
402342-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-662-2625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402342-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026