PartsTable
Technical Data Sheet
40230 ITEM 301 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, end_item_identification: ACTUATOR, JET BLAST DEFLECTOR, material_document_and_classification: TRELLEBORG TURCON MFR REF SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: WIPER/SCRAPPER, INTERNAL 3.00 IN. IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-640-6968, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40230 ITEM 301
NSN: 5330-01-640-6968
FSC: 5330
CAGE: 1KHV0 — EXLAR CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
end_item_identificationACTUATOR, JET BLAST DEFLECTOR
material_document_and_classificationTRELLEBORG TURCON MFR REF SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyWIPER/SCRAPPER, INTERNAL 3.00 IN. IN
NSN5330-01-640-6968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40230 ITEM 301 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: TRELLEBORG TURCON MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONACTUATOR, JET BLAST DEFLECTOR
PART NAME ASSIGNED BY CONTROLLING AGENCYWIPER/SCRAPPER, INTERNAL 3.00 IN. IN
MATERIAL DOCUMENT AND CLASSIFICATIONTRELLEBORG TURCON MFR REF SINGLE MATERIAL RESPONSE OVERALL
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
40424Interchangeable
interchangeable cross-reference
interchangeable
130983Interchangeable
interchangeable cross-reference
interchangeable
09194Interchangeable
interchangeable cross-reference
interchangeable
10015366-060Interchangeable
interchangeable cross-reference
interchangeable
C-430-14Interchangeable
interchangeable cross-reference
interchangeable
613270Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40230 ITEM 301?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40230 ITEM 301?
40230 ITEM 301 is a PACKING,PREFORMED.
What parts can replace 40230 ITEM 301?
There are 13 known substitutes for 40230 ITEM 301: 40424, 130983, 09194 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40230 ITEM 301?
40230 ITEM 301 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-640-6968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40230 ITEM 301