PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 402204
402204 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include body_height: 0.250 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, overall_height: 0.762 INCHES NOMINAL IN, overall_length: 1.550 INCHES MAXIMUM IN, body_outside_diameter: 0.875 INCHES MAXIMUM IN, input_circuit_pattern: 1 INPUT, supplementary_features: USED ON ADDING IDLER LEVER ASSY,3D BRACKET ASSY FOR MAIN FUEL CONTROL,J79 ACFT ENGINE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-589-5178, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
402204
NSN: 5315-00-589-5178
FSC: 5315
CAGE: 66503 — WOODWARD, INC. DIV FUEL SYSTEMS AND CONTROLS (USA)
SPECIFICATIONS
body_height0.250 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
overall_height0.762 INCHES NOMINAL IN
overall_length1.550 INCHES MAXIMUM IN
body_outside_diameter0.875 INCHES MAXIMUM IN
input_circuit_pattern1 INPUT
supplementary_featuresUSED ON ADDING IDLER LEVER ASSY,3D BRACKET ASSY FOR MAIN FUEL CONTROL,J79 ACFT ENGINE
inclosure_configurationCAN
terminal_surface_treatmentSOLDER
terminal_type_and_quantity3 PIN
design_function_and_quantity1 REGULATOR, VOLTAGE, DC
general_characteristics_item_descriptionLEVER OPERATED; SAE FLARE 0.250 IN. CONNECTIONS IN
NSN5315-00-589-5178
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 402204 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: USED ON ADDING IDLER LEVER ASSY,3D BRACKET ASSY FOR MAIN FUEL CONTROL,J79 ACFT ENGINE
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESUSED ON ADDING IDLER LEVER ASSY,3D BRACKET ASSY FOR MAIN FUEL CONTROL,J79 ACFT ENGINE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
40220Interchangeable
interchangeable cross-reference
interchangeable
402204Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 402204?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402204?
402204 is a MICROCIRCUIT,LINEAR.
What parts can replace 402204?
There are 2 known substitutes for 402204: 40220, 402204. Substitute compatibility should be verified for your specific system.
What is the NSN for 402204?
402204 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-589-5178. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402204

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026