PartsTable
Technical Data Sheet
Download PDF

4020396 — BRACKET,DOUBLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4020396: BRACKET,DOUBLE ANGLE.

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 0.750 INCHES NOMINAL IN, second_leg_angle: 90.0 DEGREES NOMINAL, second_leg_style: END RADIUS, second_leg_width: 0.624 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-385-9213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4020396
NSN: 5340-00-385-9213
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length0.750 INCHES NOMINAL IN
second_leg_angle90.0 DEGREES NOMINAL
second_leg_styleEND RADIUS
second_leg_width0.624 INCHES NOMINAL IN
style_designatorDOUBLE ANGLE
second_leg_length1.336 INCHES NOMINAL IN
fabrication_methodFORMED
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
center_section_height1.148 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
NSN5340-00-385-9213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4020396 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.220 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
CENTER SECTION THICKNESS: 0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 1.274 INCHES NOMINAL IN
•
SECOND LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.312 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.220 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
CENTER SECTION THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.274 INCHES NOMINAL IN
SECOND LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN
SECOND LEG WIDTH0.624 INCHES NOMINAL IN
SECOND LEG LENGTH1.336 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy 4020396?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4020396?
4020396 is a BRACKET,DOUBLE ANGLE.
What is the NSN for 4020396?
4020396 is cataloged in the U.S. Government catalog under NSN 5340-00-385-9213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4020396

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.