PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 40200 ITEM 132
40200 ITEM 132 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM SEALING ELEMENT, peripheral_diameter: 5.510 INCHES NOMINAL IN, center_hole_diameter: 4.530 INCHES NOMINAL IN, cross-sectional_height: 0.472 INCHES NOMINAL IN, end_item_identification: ACTUATOR, JET BLAST DEFLECTOR, part_name_assigned_by_controlling_agency: SEAL SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-634-0574, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40200 ITEM 132
NSN: 5330-01-634-0574
FSC: 5330
CAGE: 1KHV0 — EXLAR CORPORATION (USA)
SPECIFICATIONS
materialRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM SEALING ELEMENT
peripheral_diameter5.510 INCHES NOMINAL IN
center_hole_diameter4.530 INCHES NOMINAL IN
cross-sectional_height0.472 INCHES NOMINAL IN
end_item_identificationACTUATOR, JET BLAST DEFLECTOR
part_name_assigned_by_controlling_agencySEAL SHAFT
NSN5330-01-634-0574
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40200 ITEM 132 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 5.510 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 4.530 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.472 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER5.510 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL SHAFT
CENTER HOLE DIAMETER4.530 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.472 INCHES NOMINAL IN
END ITEM IDENTIFICATIONACTUATOR, JET BLAST DEFLECTOR
MATERIALSTEEL CASE
MATERIALRUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
22SZ52Interchangeable
interchangeable cross-reference
interchangeable
43203DGX1AInterchangeable
interchangeable cross-reference
interchangeable
MRC203SGInterchangeable
interchangeable cross-reference
interchangeable
43203Interchangeable
interchangeable cross-reference
interchangeable
CV200174Interchangeable
interchangeable cross-reference
interchangeable
325-50-387WInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 40200 ITEM 132?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40200 ITEM 132?
40200 ITEM 132 is a SEAL,PLAIN ENCASED.
What parts can replace 40200 ITEM 132?
There are 8 known substitutes for 40200 ITEM 132: 22SZ52, 43203DGX1A, MRC203SG and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 40200 ITEM 132?
40200 ITEM 132 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-634-0574. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40200 ITEM 132

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026