PartsTable
Technical Data Sheet
Download PDF

402-1069-01 — MOTOR,HYDRAULIC

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

402-1069-01: MOTOR,HYDRAULIC.

The MOTOR,HYDRAULIC is a the manufacturer industrial component. Key specifications include material: ALUMINUM HOUSING, thread_size: 0.875-14, mounting_type: FLANGE, spline_length: 1.730 INCHES NOMINAL IN, connection_type: DRAIN AND INLET, spline_quantity: 14. This part is cataloged in the U.S.

Government catalog under NSN 2540-00-421-5656, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
402-1069-01
NSN: 2540-00-421-5656
FSC: 2540 — Vehicular Furniture and Accessories
CAGE: 95685 — MARATHON LE TOURNEAU CO (USA)
SPECIFICATIONS
materialALUMINUM HOUSING
thread_size0.875-14
mounting_typeFLANGE
spline_length1.730 INCHES NOMINAL IN
connection_typeDRAIN AND INLET
spline_quantity14
thread_locationINTERNAL
drive_shaft_typeSPLINED, INVOLUTE EXTERNAL
special_features4 MTG SLOTS 0.590 IN. WIDTH BY 1.067 IN. LG ON 6.365 C TO C DIA CIRCLES IN
thread_directionRIGHT-HAND
bolt_hole_spacing1.031 IN. BY 2.062 IN
connection_designFLANGED AND THREADED
NSN2540-00-421-5656
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available MOTOR,HYDRAULIC TITLE COMPONENT PN 402-1069-01 MFR MOTOR,HYDRAULIC
KEY FEATURES
•
SPLINE MINOR DIAMETER: 1.2223 INCHES NOMINAL IN
•
BOLT HOLE THREAD SIZE: 0.375-16
•
DISPLACEMENT TYPE: CONSTANT
•
CONNECTION DESIGN: FLANGED AND THREADED
•
TORQUE LOAD RATING: 8620.0 INCH-POUNDS IN
•
SHAFT PROTRUSION LENGTH: 2.220 INCHES NOMINAL IN
•
BOLT HOLE SPACING: 1.031 IN. BY 2.062 IN
•
SPLINE LENGTH: 1.730 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SPLINE MINOR DIAMETER1.2223 INCHES NOMINAL IN
BOLT HOLE THREAD SIZE0.375-16
DISPLACEMENT TYPECONSTANT
CONNECTION DESIGNFLANGED AND THREADED
TORQUE LOAD RATING8620.0 INCH-POUNDS IN
SHAFT PROTRUSION LENGTH2.220 INCHES NOMINAL IN
BOLT HOLE SPACING1.031 IN. BY 2.062 IN
SPLINE LENGTH1.730 INCHES NOMINAL IN
CONNECTION TYPEDRAIN AND INLET
BOLT HOLE DIAMETER0.590 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
AP-111223-RGNSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
23-3036Reference document
Same NSN cross-reference
Reference document — Secondary reference
69D4959-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 402-1069-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402-1069-01?
402-1069-01 is a MOTOR,HYDRAULIC.
What parts can replace 402-1069-01?
There are 3 known substitutes for 402-1069-01: AP-111223-RGN, 23-3036, 69D4959-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 402-1069-01?
402-1069-01 is cataloged in the U.S. Government catalog under NSN 2540-00-421-5656. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402-1069-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.