PartsTable
Technical Data Sheet
PartsTable / MRO / 402-1-7
402-1-7 ✓ Verified by PartsTable
Sandberg · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

A Sandberg Design Cover effectively protects your phone against marks and scratches while also giving it a more personal look. Key specifications include length: 0.600 INCHES NOMINAL IN, diameter: 0.680 INCHES NOMINAL IN, material: STEEL COMP 1117 OVERALL, body_style: STANDARD ROUND A, body_length: 4.500 INCHES NOMINAL IN, fuel_filter: NOT INCLUDED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-078-7029, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 402-1-7
NSN: 5340-00-078-7029
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
length0.600 INCHES NOMINAL IN
diameter0.680 INCHES NOMINAL IN
materialSTEEL COMP 1117 OVERALL
body_styleSTANDARD ROUND A
body_length4.500 INCHES NOMINAL IN
fuel_filterNOT INCLUDED
body_diameter0.688 INCHES NOMINAL IN
body_materialSTEEL CORROSION RESISTING
bore_diameter0.438 INCHES MINIMUM IN
mounting_typeSAE PREFERRED
overall_width3.250 INCHES NOMINAL IN
priming_leverNOT INCLUDED
NSN5340-00-078-7029
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 402-1-7 MFR: Sandberg ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: BALL CLIP
•
MATERIAL: COPPER ALLOY
•
LENGTH: 0.600 INCHES NOMINAL IN
•
OPENING DIAMETER: 0.562 INCHES NOMINAL IN
•
DIAMETER: 0.680 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.025 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORBALL CLIP
MATERIALCOPPER ALLOY
LENGTH0.600 INCHES NOMINAL IN
OPENING DIAMETER0.562 INCHES NOMINAL IN
DIAMETER0.680 INCHES NOMINAL IN
MATERIAL THICKNESS0.025 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
149Upgraded Successor
successor cross-reference
successor
D703Upgraded Successor
successor cross-reference
successor
AP1538-0001Upgraded Successor
successor cross-reference
successor
MS51926-4Interchangeable
interchangeable cross-reference
interchangeable
MIL-C-496Interchangeable
interchangeable cross-reference
interchangeable
40217Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 402-1-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402-1-7?
402-1-7 is a RESISTOR,FIXED,WIRE WOUND manufactured by Sandberg. It is classified as a MRO (MRO_GENERAL).
What parts can replace 402-1-7?
There are 17 known substitutes for 402-1-7: 149, D703, AP1538-0001 and 14 more. Substitute compatibility should be verified for your specific system.
Is 402-1-7 still available?
402-1-7 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402-1-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026