PartsTable
Technical Data Sheet

402/K2663 — BOLT ASSEMBLY,CLAMP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

402/K2663: BOLT ASSEMBLY,CLAMP.

The BOLT ASSEMBLY,CLAMP is a the manufacturer industrial component. Key specifications include overall_height: 20.0 MILLIMETERS NOMINAL MM, overall_length: 885.0 MILLIMETERS NOMINAL MM, mounting_method: UNTHREADED HOLE(S), overall_thickness: 3.0 MILLIMETERS NOMINAL MM, surface_treatment: UNABLE TO DECODE, end_item_identification: 3930-01715-6492. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-716-5152, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
402/K2663
NSN: 5340-01-716-5152
FSC: 5340 — Hardware, Commercial
CAGE: 0JKF0 — JCB INC. (USA)
SPECIFICATIONS
overall_height20.0 MILLIMETERS NOMINAL MM
overall_length885.0 MILLIMETERS NOMINAL MM
mounting_methodUNTHREADED HOLE(S)
overall_thickness3.0 MILLIMETERS NOMINAL MM
surface_treatmentUNABLE TO DECODE
end_item_identification3930-01715-6492
mounting_facility_quantity4
color_document_and_classificationSTD00009 1196 (FED-GRN) MFR REF SINGLE COLOR RESPONSE
part_name_assigned_by_controlling_agencyCLAMP PLATE-RAM
surface_treatment_document_and_classificationUNABLE TO DECODE
NSN5340-01-716-5152
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 402/K2663 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY QUANTITY: 4
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
OVERALL THICKNESS: 3.0 MILLIMETERS NOMINAL MM
•
COLOR DOCUMENT AND CLASSIFICATION: STD00009 1196 (FED-GRN) MFR REF SINGLE COLOR RESPONSE
•
COLOR: GREEN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT20.0 MILLIMETERS NOMINAL MM
MOUNTING FACILITY QUANTITY4
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
MOUNTING METHODUNTHREADED HOLE(S)
OVERALL THICKNESS3.0 MILLIMETERS NOMINAL MM
OVERALL LENGTH885.0 MILLIMETERS NOMINAL MM
COLOR DOCUMENT AND CLASSIFICATIONSTD00009 1196 (FED-GRN) MFR REF SINGLE COLOR RESPONSE
COLORGREEN
SURFACE TREATMENTUNABLE TO DECODE
PART NAME ASSIGNED BY CONTROLLING AGENCYCLAMP PLATE-RAM
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 402/K2663?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 402/K2663?
402/K2663 is a BOLT ASSEMBLY,CLAMP.
What is the NSN for 402/K2663?
402/K2663 is cataloged in the U.S. Government catalog under NSN 5340-01-716-5152. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 402/K2663