PartsTable
Technical Data Sheet
Download PDF

40193-6 — SCREW,BONE,MAXILLOFACIAL SURGERY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

40193-6: SCREW,BONE,MAXILLOFACIAL SURGERY.

SCREW,BONE,MAXILLOFACIAL SURGERY. Key specifications include material: TITANIUM OVERALL, special_features: 2.0MM SELF-TAPPING MINI SCREWS;; COARSE PITCH; LENGTH 6MM; USED IN MAXILLOFACIAL IMPLANT SURGERY MM, weighted_feature: NOT PROVIDED, design_designation: SYNTHES, part_name_assigned_by_controlling_agency: SCREW 2.0MM TI CORTEX COURSE PITCH MM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-816-9672, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
40193-6
NSN: 5331-00-816-9672
NIINs: 008169672, 011451934, 015043524
FSC: 5331 — O-ring
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialTITANIUM OVERALL
special_features2.0MM SELF-TAPPING MINI SCREWS;; COARSE PITCH; LENGTH 6MM; USED IN MAXILLOFACIAL IMPLANT SURGERY MM
weighted_featureNOT PROVIDED
design_designationSYNTHES
part_name_assigned_by_controlling_agencySCREW 2.0MM TI CORTEX COURSE PITCH MM
NSN5331-00-816-9672
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 40193-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
SUBSTITUTES & CROSS-REFERENCES 2
4808-4165Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
575R946H06Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 40193-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 40193-6?
40193-6 is a SCREW,BONE,MAXILLOFACIAL SURGERY.
What parts can replace 40193-6?
There are 2 known substitutes for 40193-6: 4808-4165, 575R946H06. Substitute compatibility should be verified for your specific system.
What is the NSN for 40193-6?
40193-6 is cataloged in the U.S. Government catalog under NSN 5331-00-816-9672. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 40193-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.