PartsTable
Technical Data Sheet
Download PDF

4016996 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

4016996: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 1.185 INCHES MINIMUM AND 1.191 INCHES MAXIMUM IN, precious_material: GOLD, gage_ring_thickness: 0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, cross-sectional_thickness: 0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN, precious_material_and_location: OVERALL SURFACE GOLD, material_document_and_classification: AMS5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-390-1563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4016996
NSN: 5330-00-390-1563
FSC: 5330 — Packing and Gasket Materials
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
outside_diameter1.185 INCHES MINIMUM AND 1.191 INCHES MAXIMUM IN
precious_materialGOLD
gage_ring_thickness0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
cross-sectional_thickness0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
precious_material_and_locationOVERALL SURFACE GOLD
material_document_and_classificationAMS5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-390-1563
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4016996 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL: GOLD
•
GAGE RING THICKNESS: 0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.185 INCHES MINIMUM AND 1.191 INCHES MAXIMUM IN
•
PRECIOUS MATERIAL AND LOCATION: OVERALL SURFACE GOLD
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.129 INCHES MINIMUM AND 0.132 INCHES MAXIMUM IN
PRECIOUS MATERIALGOLD
GAGE RING THICKNESS0.118 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5542 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.185 INCHES MINIMUM AND 1.191 INCHES MAXIMUM IN
PRECIOUS MATERIAL AND LOCATIONOVERALL SURFACE GOLD
SUBSTITUTES & CROSS-REFERENCES 2
4016996CReference document
Same NSN cross-reference
Reference document — Secondary reference
19077Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 4016996?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4016996?
4016996 is a GASKET.
What parts can replace 4016996?
There are 2 known substitutes for 4016996: 4016996C, 19077. Substitute compatibility should be verified for your specific system.
What is the NSN for 4016996?
4016996 is cataloged in the U.S. Government catalog under NSN 5330-00-390-1563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4016996