PartsTable
Technical Data Sheet
Download PDF

4013321 — PIN,STRAIGHT,THREADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

4013321: PIN,STRAIGHT,THREADED.

The PIN,STRAIGHT,THREADED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1213 OVERALL, thread_class: 3A A, thread_length: 0.125 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: CHAMFERED, pin_grip_length: 0.190 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-385-5305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4013321
NSN: 5315-00-385-5305
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 4W109 — CARDONA MFG CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1213 OVERALL
thread_class3A A
thread_length0.125 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
first_end_styleCHAMFERED
pin_grip_length0.190 INCHES MINIMUM IN
second_end_styleSQUARE
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
first_end_locationTHREADED END
pin_overall_length0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
nominal_thread_size2.000 INCHES IN
NSN5315-00-385-5305
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 4013321 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
THREAD LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.0910 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH125.0 MICROINCHES OVERALL
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
THREAD LENGTH0.125 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.0910 INCHES MINIMUM AND 0.0930 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.405 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 4013321?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4013321?
4013321 is a PIN,STRAIGHT,THREADED.
What is the NSN for 4013321?
4013321 is cataloged in the U.S. Government catalog under NSN 5315-00-385-5305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4013321