PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 401265

401265 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SWAGING SLEEVE,WIRE ROPE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_width: 1.875 INCHES NOMINAL IN, overall_height: 2.375 INCHES NOMINAL IN, overall_length: 3.250 INCHES NOMINAL IN, style_designator: OBLONG TAPERED END, accommodated_material_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5310-00-311-4304, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
401265
NSN: 5310-00-311-4304
FSC: 5310
CAGE: 76110 — MAREMONT CORP (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_width1.875 INCHES NOMINAL IN
overall_height2.375 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
style_designatorOBLONG TAPERED END
accommodated_material_diameter0.875 INCHES NOMINAL IN
NSN5310-00-311-4304
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 401265 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.515 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL IN
•
THICKNESS AT BOLT HOLE: 0.0747 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
HOLE DIAMETER0.515 INCHES NOMINAL IN
OUTSIDE DIAMETER1.250 INCHES NOMINAL IN
THICKNESS AT BOLT HOLE0.0747 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
24147InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5103249InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
538622-40InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M38527/01-030DInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
7717-18InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
24147.11-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 401265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401265?
401265 is a SWAGING SLEEVE,WIRE ROPE.
What parts can replace 401265?
There are 10 known substitutes for 401265: 24147, 5103249, 538622-40 and 7 more. Substitute compatibility should be verified for your specific system.
Is 401265 still available?
401265 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401265

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026