PartsTable
Technical Data Sheet
Download PDF

401264 — SHAFT,STRAIGHT

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

401264: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL, end_style: 90 DEGREE PARALLEL, ring_style: STRAIGHT GAP, usage_design: EXTERNAL, inside_diameter: 2.976 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN, outside_diameter: 3.152 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-806-4104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
401264
NSN: 5325-00-806-4104
NIINs: 008064104, 013275589
FSC: 5325 — Fastening Devices
CAGE: 77640 — ZF ACTIVE SAFETY AND ELECTRONICS US LLC DIV TRW COMMERCIAL STEERING SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL
end_style90 DEGREE PARALLEL
ring_styleSTRAIGHT GAP
usage_designEXTERNAL
inside_diameter2.976 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
outside_diameter3.152 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
material_diameter0.088 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
casehardening_indicatorNOT CASEHARDENED
cross-sectional_shape_styleROUND
material_document_and_classificationASTM A237 ASSN STD SINGLE MATERIAL RESPONSE
NSN5325-00-806-4104
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 401264 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
USAGE DESIGN: EXTERNAL
•
END STYLE: 90 DEGREE PARALLEL
•
MATERIAL DIAMETER: 0.088 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A237 ASSN STD SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: ROUND
•
OUTSIDE DIAMETER: 3.152 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 2.976 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
TECHNICAL CHARACTERISTICS
USAGE DESIGNEXTERNAL
END STYLE90 DEGREE PARALLEL
MATERIAL DIAMETER0.088 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A237 ASSN STD SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEROUND
OUTSIDE DIAMETER3.152 INCHES MINIMUM AND 3.188 INCHES MAXIMUM IN
INSIDE DIAMETER2.976 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
RING STYLESTRAIGHT GAP
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
35P354Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 401264?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401264?
401264 is a SHAFT,STRAIGHT.
What parts can replace 401264?
There is 1 known substitute for 401264: 35P354. Substitute compatibility should be verified for your specific system.
What is the NSN for 401264?
401264 is cataloged in the U.S. Government catalog under NSN 5325-00-806-4104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401264

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.