PartsTable
Technical Data Sheet
Download PDF

401252 — SCREW,LOCKING,ORTHOPEDIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

401252: SCREW,LOCKING,ORTHOPEDIC.

The SCREW,LOCKING,ORTHOPEDIC is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: SCREW LOCKING ORTHO 2MM TITANIUM SELF TAPPING STARDRIVE 12MM 5S MM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-119-1920, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
401252
NSN: 5331-00-119-1920
NIINs: 001191920, 009986468, 014998004
FSC: 5331 — O-ring
CAGE: 77521 — BOSCH AUTOMATION TECHNOLOGY (USA)
SPECIFICATIONS
special_features2.0MM TITANIUM; SELF-TAPPING; WITH STARDRIVE TM RECESS,12MM; TO USE WITH MANDIBLE LOCKING PLATE SYSTEM FOR RECONSTRUCTIVE SURGERY, VASCULARIZED BONE GRAFT AND ORTHOGANATHIC SURGERY MM
part_name_assigned_by_controlling_agencySCREW LOCKING ORTHO 2MM TITANIUM SELF TAPPING STARDRIVE 12MM 5S MM
NSN5331-00-119-1920
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 401252 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.728 INCHES MINIMUM AND 0.740 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 2
406198Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
E301/4ENGL PART 5Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 401252?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401252?
401252 is a SCREW,LOCKING,ORTHOPEDIC.
What parts can replace 401252?
There are 2 known substitutes for 401252: 406198, E301/4ENGL PART 5. Substitute compatibility should be verified for your specific system.
What is the NSN for 401252?
401252 is cataloged in the U.S. Government catalog under NSN 5331-00-119-1920. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401252