PartsTable
Technical Data Sheet
PartsTable / MRO / 4011-4
4011-4 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: NUT (M10 X 1.5). This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-909-6540, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 4011-4
NSN: 5999-00-909-6540
FSC: 5999
CAGE: 12881 — METAL TEXTILES CORPORATION DBA METAL TEXTILES DIV ELECTRONIC SHIELDING GROUP (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyNUT (M10 X 1.5)
NSN5999-00-909-6540
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 4011-4 MFR RESISTOR,FIXED,COMPOSITION
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.020 INCHES NOMINAL IN
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT RF SHIELDING GASKET
•
HOLE DIAMETER: 0.160 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.157 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.020 INCHES NOMINAL IN
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
HOLE DIAMETER0.160 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.157 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.031 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.031 INCHES NOMINAL IN
OVERALL WIDTH1.344 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.157 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
FL-E0012-085Upgraded Successor
successor cross-reference
successor
01Upgraded Successor
successor cross-reference
successor
SB11-132Upgraded Successor
successor cross-reference
successor
04-0402-3175Upgraded Successor
successor cross-reference
successor
309-1142Upgraded Successor
successor cross-reference
successor
32-843Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 4011-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4011-4?
4011-4 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 4011-4?
There are 23 known substitutes for 4011-4: FL-E0012-085, 01, SB11-132 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4011-4?
4011-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5999-00-909-6540. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4011-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026