PartsTable
Technical Data Sheet
Download PDF

401095 — DUMMY LOAD,ELECTRICAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

401095: DUMMY LOAD,ELECTRICAL.

The DUMMY LOAD,ELECTRICAL is a the manufacturer industrial component. Key specifications include material: STEEL BODY, hole_diameter: 0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-596-7691, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 401095
NSN: 5310-00-596-7691
NIINs: 005967691, 008431671, 011471147, 012765493, 014993653
FSC: 5310 — Nuts and Washers
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL BODY
hole_diameter0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES ALL ENDS IN
end_item_identificationM871A3 SEMI-TRAILER,22.5 TON,2330-01-458-6865 END ITEM
thread_series_designatorNPTF ALL ENDS
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-596-7691
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 401095 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE DIAMETER: 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
OUTSIDE DIAMETER0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
END ITEM IDENTIFICATIONW/S:SHIPBOARD MATERIAL HANDLING EQUIPMENT (MHE); AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02M JUL83)(AN/UYQ-3A); AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); SUPPORT EQUIPMENT, B-1 AIRCRAFT; MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); FIRE CONTROL SYSTEM, MISSILE MK 74 (FCS); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H); GUN MOUNT, MK 75 (GM); FIRE PUMPS; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV) A
MATERIALSTEEL COMP 1050 OR STEEL COMP 1551 OR STEEL COMP 1059 OR STEEL COMP 1060 OR STEEL COMP 1561 OR STEEL COMP 1064 OVERALL
HOLE DIAMETER0.195 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 9
MS35335-32Reference document
Same NSN cross-reference
Reference document — Secondary reference
656193Reference document
Same NSN cross-reference
Reference document — Secondary reference
138479Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN936610Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
5310005967691Reference document
Same NSN cross-reference
Reference document — Secondary reference
LA436-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 401095?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 401095?
401095 is a DUMMY LOAD,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 401095?
There are 9 known substitutes for 401095: MS35335-32, 656193, 138479 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 401095?
401095 is cataloged in the U.S. Government catalog under NSN 5310-00-596-7691. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 401095

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.